新闻动态
U型流水槽钢模具材质选用较高
U型流水槽钢模具材质选用较高，采用天然麻石机井剥削加工而成，材质的强硬度较高，模具的表面无瑕疵、光滑，洁净，而且也无明显的色差、色斑、装卸的时候要进行轻、稳、慢以防止模具磕碰而损坏材料。
The U-shaped channel steel mold is made of high material, which is exploited and processed by natural hemp shaft. The material has high strength and hardness. The surface of the mold is free of defects, smooth and clean, and there is no obvious color difference and color spots. It should be light, stable and slow during loading and unloading, so as to prevent the material from being damaged by the collision of the mold.
U型流水槽钢模具选用钢板制作而成，内壁不得有凸起的小泡和小坑，如此会影响模具的整体美观度，，同时模具采用仪器按照统一的标准进行下料。
The U-shaped flow channel steel mold is made of steel plate, and there shall be no raised bubbles and pits on the inner wall, which will affect the overall beauty of the mold. At the same time, the mold shall be cut by instruments according to unified standards
The U-shaped channel steel mold is made of high material, which is exploited and processed by natural hemp shaft. The material has high strength and hardness. The surface of the mold is free of defects, smooth and clean, and there is no obvious color difference and color spots. It should be light, stable and slow during loading and unloading, so as to prevent the material from being damaged by the collision of the mold.
U型流水槽钢模具选用钢板制作而成，内壁不得有凸起的小泡和小坑，如此会影响模具的整体美观度，，同时模具采用仪器按照统一的标准进行下料。
The U-shaped flow channel steel mold is made of steel plate, and there shall be no raised bubbles and pits on the inner wall, which will affect the overall beauty of the mold. At the same time, the mold shall be cut by instruments according to unified standards
