鼓风机可以安装在紧邻跑道流水槽的墙体顶部
该铝合金挂壁安装在流水槽墙的顶部,且用木垫片调整其位置。支撑臂也有不同的调节孔,使增氧推水设备的上沿部分保持高出池水面至少2cm~3cm。
The aluminium alloy hanging wall is installed on the top of the flume wall, and its position is adjusted by wooden gasket. The support arm also has different adjusting holes, so that the upper edge of the oxygen booster is kept at least 2 cm to 3 cm above the water surface of the pond.
鼓风机可以安装在紧邻跑道流水槽的墙体顶部,上有顶棚保护;也可建在防风雨工棚内。如果是安装在跑道旁边的工棚内,需要选择适当大小的输气管,以防止气流减少,确保其能正常通向每组曝气管。从一个鼓风机引出的输气管通常要配套使用6cm~7.5cm的PVC管。
The blower can be installed on the top of the wall adjacent to the runway flume and protected by a roof. It can also be built in a weatherproof shed. If installed in the shed next to the runway, it is necessary to select the appropriate size of the gas pipeline to prevent air flow reduction and ensure that it can normally access to each group of aeration pipes. The gas pipeline drawn from a blower is usually equipped with a 6cm-7.5cm PVC pipe.