新闻动态
流水槽沟盖板生成原理
准备流水槽沟盖板模具一个，振动平台一台，混合好的混凝土适量。
Prepare a flume cover plate mold, a vibration platform, mix the right amount of concrete.
将混合好的混凝土倒入水泥流水槽沟盖板塑料模具内，经振动平台振动30秒左右，去下置于阴凉避光的仓库之内。
The mixed concrete is poured into the plastic mould of the cover plate of the cement flow trough, and vibrated by the vibration platform for about 30 seconds, then placed in a cool and light-shielded warehouse.
放置一定的时间大约24小时左右冬季一般放置2-3天。
Place a certain time about 24 hours in winter, usually 2-3 days.
4、待混凝土凝固成型之后进行拆模或者脱模成型。
4. Demoulding or demoulding after concrete solidification.
流水槽沟盖板模具分类
Classification of Flow Channel Cover Plate Dies
流水槽沟盖板模具可分为流水槽沟盖板塑料模具、流水槽沟盖板塑料模型、流水槽沟盖板塑料模子、流水槽沟盖板塑料模盒，流水槽沟盖板钢模具，流水槽沟盖板钢模型、流水槽沟盖板钢模子、流水槽沟盖板钢模盒之称。
Material Characteristics of Flow Channel Cover Plate Die
流水槽沟盖板塑料模具一般采用聚丙烯（PP）为原料，其材料具有良好的可锻性、切削加工性、淬硬性及可磨削性等。
Polypropylene (PP) is usually used as raw material for plastic die of flume cover plate. The material has good malleability, cutting machinability, hardening and grindability.
流水槽沟盖板钢模具一般采用钣金钢为原料，其材料具有很好的可塑性、适硬性、加工型、超韧性等。
Sheet metal steel is generally used as raw material in the die of flume cover plate. Its material has good plasticity, hardness, processing type, super toughness and so on.
流水槽沟盖板模具尺寸
Dimensions of die for flume cover plate
200mm*400mm*100mm500mm*400mm*80mm300mm*600mm*150mm500mm*450mm*10mm 250mm*500mm*120mm500mm*350mm*80mm
200mm*400mm*100mm 500mm*400mm*80mm 300mm*600mm*150mm 500mm*450mm*10mm 250mm*500mm*120mm 500mm*350mm*80mm
Prepare a flume cover plate mold, a vibration platform, mix the right amount of concrete.
将混合好的混凝土倒入水泥流水槽沟盖板塑料模具内，经振动平台振动30秒左右，去下置于阴凉避光的仓库之内。
The mixed concrete is poured into the plastic mould of the cover plate of the cement flow trough, and vibrated by the vibration platform for about 30 seconds, then placed in a cool and light-shielded warehouse.
放置一定的时间大约24小时左右冬季一般放置2-3天。
Place a certain time about 24 hours in winter, usually 2-3 days.
4、待混凝土凝固成型之后进行拆模或者脱模成型。
4. Demoulding or demoulding after concrete solidification.
流水槽沟盖板模具分类
Classification of Flow Channel Cover Plate Dies
流水槽沟盖板模具可分为流水槽沟盖板塑料模具、流水槽沟盖板塑料模型、流水槽沟盖板塑料模子、流水槽沟盖板塑料模盒，流水槽沟盖板钢模具，流水槽沟盖板钢模型、流水槽沟盖板钢模子、流水槽沟盖板钢模盒之称。
Thqingxiji.89ix.comdipingy.89ix.commojuhpz.37ix.com.cnmojusn.37ix.com.cnzhagun.37ix.com.cn
wantoun.37ix.com.cne flume cover plate mould can be divided into the flume cover plate plastic mould, the flume cover plate plastic model, the flume cover plate plastic mold, the flume cover plate plastic box, the flume cover plate steel mold, the flume cover plate steel model, the flume cover plate steel mold, the flume cover plate steel box.
流水槽沟盖板模具材质特征Material Characteristics of Flow Channel Cover Plate Die
流水槽沟盖板塑料模具一般采用聚丙烯（PP）为原料，其材料具有良好的可锻性、切削加工性、淬硬性及可磨削性等。
Polypropylene (PP) is usually used as raw material for plastic die of flume cover plate. The material has good malleability, cutting machinability, hardening and grindability.
流水槽沟盖板钢模具一般采用钣金钢为原料，其材料具有很好的可塑性、适硬性、加工型、超韧性等。
Sheet metal steel is generally used as raw material in the die of flume cover plate. Its material has good plasticity, hardness, processing type, super toughness and so on.
流水槽沟盖板模具尺寸
Dimensions of die for flume cover plate
200mm*400mm*100mm500mm*400mm*80mm300mm*600mm*150mm500mm*450mm*10mm 250mm*500mm*120mm500mm*350mm*80mm
200mm*400mm*100mm 500mm*400mm*80mm 300mm*600mm*150mm 500mm*450mm*10mm 250mm*500mm*120mm 500mm*350mm*80mm
