排水沟模具进行正常的运作时,要按规章制度来进行而日常与定期的保养,日常保养主要是负责清洁、润滑、紧固、防腐,这个是每天都要进行检查的,而定期保养,在规定的时间里对机械设备进行若干次保养和修理。排水沟模具模具一般分为两个部分：动模和定模,或凸模和凹模,它们可分可合。分开时装入坯料或取出制件,合拢时使制件与坯料分离或成形。单分型面注塑模单分型面注塑模具也叫双板式注塑模具,它是注塑模具中最简单的一种,构成型腔的一部分在动模上,另一部分在定模上。而双分型面注塑模双分型面注塑模具特指浇注系统凝料和制件由不同的分型面取出者,也叫三板式注塑模。每天检查模具的所有导向的导柱,导套是否损伤,包括模具导柱.行位等部件,定期对其加油保养,每天上下班保养两次。需要注意的是要重视模具的表面保养,它直接影响产品的表面质量,重点是防止锈蚀,因此,选用一种适合、优质、专业的防锈油就尤为重要。

The drainage ditch mold normal operation, according to the rules and regulations of the daily and regular maintenance, routine maintenance is mainly responsible for cleaning, lubrication, fastening, anti-corrosion, this is to check every day, and regular maintenance, in the time of mechanical equipment maintenance and repair several times. Drain mold die is generally divided into two parts: moving die and fixed die, or punch and die, they can be divided into fit. Separate the fashion into the blank or take out the part, and make the part separate from the billet when it is closed. The single parting surface injection mold is also called the double plate injection mold. It is the simplest one in the injection mold. One part of the mold cavity is on the moving die, the other part on the fixed die. But the double parting surface injection mold, the double parting surface injection mold, specially refers to the gating system, the condensate and the workpiece by different parting planes take out, also calls the three plate type injection mold. Check all the guide pins and guide bushes of the mold every day, including the die, guide post, row, bit, etc., regularly refuel and maintain them, and work two times a day to and from work. Note that attention should be paid to the surface of the mold maintenance, it directly affects the surface quality of products, the focus is to prevent corrosion, therefore, the choice of a suitable, high-quality, professional rust preventive oil is particularly important.